Skip to content

7m (22.97ft) Generic Compatible SFP-10G-ACC24-7M 10G SFP+ Active Direct Attach Twinax Copper Cable

Original price $102.00
Current price $61.00
SKU

7m (22.97ft) Generic Compatible SFP-10G-ACC24-7M 10G SFP+ Active Direct Attach Twinax Copper Cable


direcXource's SFP-10G-ACC24-7M DAC is an active 10Gbps SFP+ to SFP+ direct attach cable for use in 10GBASE Ethernet. SFP+ active DAC provides 10Gb/s throughput for 7m interconnection with high speed twin-axial copper cable. Standard length options cover from 1 meter to 10 meters. This DAC is fully compliant with SFP+ Multi-Source Agreement (MSA), IEEE 802.3ae 10GBASE-CR and SFI standard. The twin-axial copper cable's wire gauge is 24AWG and pre-terminated with MSA compliant 20-pin edge type connectors. MSA memory map are accessible via 2-wire Interface (TWI/I2C). Our active DACs are factory pre-programmed for compatibility, perform identically to generic MSA direct attach cables.


Feature

  • Hot Pluggable SFP+ to SFP+ Topology
  • Data rate up to 10.3Gbps
  • Pre-terminated 24AWG twin-axial copper cable
  • 10.3125Gbps SFI electrical interface
  • Minimum bending radius 30mm
  • MSA memory accessible via 2-wire interface
  • Single 3.3V power supply voltage
  • Power consumption < 0.5W
  • Ambient temperature range 0 to 70°C for commercial application
  • Compliant with SFF-8431, SFF-8432, SFF-8419, SFF-8472
  • Compliant with IEEE 802.3ae 10GBASE-CR
  • Compliant with RoHS, REACH, CE, FCC standards

Application

  • 10G Ethernet
  • Data Center

Specification

Part Number SFP-10G-ACC24-7M Topology SFP+ to SFP+
Max Data Rate 10Gbps Cable Length 7m (22.97ft)
Cable Type Twinax Wire Gauge 24AWG
Jacket Meterial OFNR (PVC) Minimum Bend Radius 30mm
Signal Conditioner Redriver for TX and RX Modulation Format NRZ
Power Consumption 0.5W Commercial Temperature Range 0 to 70°C (32 to 158°F)