Skip to content

3m (9.84ft) Cisco SFP-H10GB-ACU3M Compatible 10G SFP+ Active Direct Attach Twinax Copper Cable

Original price $84.00
Current price $50.00
SKU

3m (9.84ft) Cisco SFP-H10GB-ACU3M Compatible 10G SFP+ Active Direct Attach Twinax Copper Cable


Cisco SFP-H10GB-ACU3M compatible DAC is an active 10Gbps SFP+ to SFP+ direct attach cable for use in 10GBASE Ethernet. SFP+ active DAC provides 10Gb/s throughput for 3m interconnection with high speed twin-axial copper cable. Standard length options cover from 1 meter to 10 meters. This DAC is fully compliant with SFP+ Multi-Source Agreement (MSA), IEEE 802.3ae 10GBASE-CR and SFI standard. The twin-axial copper cable's wire gauge is 30AWG and pre-terminated with MSA compliant 20-pin edge type connectors. MSA memory map are accessible via 2-wire Interface (TWI/I2C). Our active DACs are factory pre-programmed for compatibility, perform identically to original Cisco SFP-H10GB-ACU3M direct attach cables.


Feature

  • Equivalent to Cisco SFP-H10GB-ACU3M in function
  • Hot Pluggable SFP+ to SFP+ Topology
  • Data rate up to 10.3Gbps
  • Pre-terminated 30AWG twin-axial copper cable
  • 10.3125Gbps SFI electrical interface
  • Minimum bending radius 23mm
  • MSA memory accessible via 2-wire interface
  • Single 3.3V power supply voltage
  • Power consumption < 0.5W
  • Ambient temperature range 0 to 70°C for commercial application
  • Compliant with SFF-8431, SFF-8432, SFF-8419, SFF-8472
  • Compliant with IEEE 802.3ae 10GBASE-CR
  • Compliant with RoHS, REACH, CE, FCC standards

Application

  • 10G Ethernet
  • Data Center

Specification

Cisco Compatible P/N SFP-H10GB-ACU3M Topology SFP+ to SFP+
Max Data Rate 10Gbps Cable Length 3m (9.84ft)
Cable Type Twinax Wire Gauge 30AWG
Jacket Meterial OFNR (PVC) Minimum Bend Radius 23mm
Signal Conditioner Redriver for TX and RX Modulation Format NRZ
Power Consumption 0.5W Commercial Temperature Range 0 to 70°C (32 to 158°F)